Dies, Shell Holders, Pullers, Pins, & Plates

These seating stems are designed to fit Hornady® Custom Grade™ Dies, and are machined to fit the profile of the A-Tip bullets to seat them as precisely as possible without damaging bullets. (Not compatible with other manufacturers’ dies.)

Lee Billet Aluminum Lock Rings are easy to adjust, just finger tighten, holds the adjustment rock solid. Package of 3

Use RCBS® Decapping dies to quickly remove primers from cases prior to cleaning.

3-Die Roll Crimp Set - Group C - Straight Walled Rifle Cartridges The 3-Die Roll Crimp Set is for loading straight-wall cartridges. Its steel Sizer Die sizes the case and de-primes. Note: Cases must be lubricated. The Expander Die expands the case to the...

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

Lee 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Lee 4-Die Set. Choose this die set for maximum versatility. The set features a full...

Redding Full length die sets for bottleneck cases contain two dies (Sizer and Seater). The full length resizing die contains a decapping rod assembly with a neck expander (size button). The seating die includes bullet guide, built in crimp ring and the...

  Redding Bullet Seating Micrometers are the perfect addition to any bullet seating die that utilizes 1/2-20" threads. For years Redding Competition Seating Dies have been known as one of the most accurate seating dies made because of their bullet...

Trimmer Pilots Hornady® trimmer pilots are interchangeable in the Hornady Cam Lock Trimmer.

Lock-N-Load® Modified Cases are readily available to fit most popular rifle chambers. All are manufactured to SAAMI specs.

Hornady`s Series II die sets are for the most popular handgun cartridges.This three-die set includes: size die, expander die, seating die.

Quality, continuous improvement, and innovation are the bedrock principles of the Hornady reloading division. You’ll find that handloading your own ammunition custom tailored to your rifle or handgun and your own shooting needs, couldn’t be...

Great Dies. Great Value. Perfect for the handloader looking to maximize the efficiency of their reloads, American Series™ die sets deliver excellent reloading performance at an economical price. Die bodies are precision reamed from premium steel...

Great Dies. Great Value. Perfect for the handloader looking to maximize the efficiency of their reloads, American Series™ die sets deliver excellent reloading performance at an economical price. Die bodies are precision reamed from premium steel...

Hornady's full length bottleneck cartridge sizing dies ensure that factory specifications are restored. Full length sizing dies ensure the highest reliability, and allow brass to be used in more than one firearm, by ensuring that the brass is returned to...

Hornady Neck Size Reloading Die is an effective, precise way to perfectly size your cases for hand-loading. Neck sizing with this Hornady reloading tool can eliminate problems of excessive head space, and align the bullet perfectly with the bore,...

Lock-N-Load® Die and Conversion Bushings US Patent: 6,481,916 Simply thread a Hornady® Lock-N-Load® Conversion Kit into your RCBS® Rock Chucker or other reloading press using a 1¼"-12 thread, and you're ready to start using the...

Allows you to make precise adjustments of all standard 7/8"-14 dies and accessories. Clamps around the whole die and won’t damage the threads. Applies constant pressure across the threads to hold the ring in place. Wrench Flats: Remove and replace...

RCBS® Trim Pro Case Trimmers feature uniquely shaped shell holders to firmly hold rifle and pistol cases in perfect alignment with the cutter. This system allows for accurate and repeatable case trimming lengths and leaves the case mouths...

RCBS® 5-Station Shell Plates properly align the case with the reloading die during reloading. They’re built from hardened steel and capture 0.125-inch of the case head for proper SAAMI headspacing. They feature five stations and are for use on...

A few twists of the Precision Mic and you'll know your chamber headspace and bullet seating depth to 0.001 of an inch. The Precision Mic measures from the datum point on the case shoulder to the base, giving you spot-on SAAMI tolerance readings. An...

Full-Length Die Set - Group A - Popular Rifle Cartridges This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length...

Decapping Unit Standard This unit features an expander rod and ball and a decapping pin. It’s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges.   Decapping Unit - Short This replacement steel...

RCBS® offers a variety of decapping pins for all reloading needs. Headed pins are for most current production expander-decapping and decapping rods. Small pins are for pre-1990s collet-style rods designed for small-primer cartridges, as well as for...

Not sure about the powder charge? Need to change bullets? The RCBS® Standard Bullet Puller is designed to easily pull jacketed bullets without damaging them. It utilizes the standard 7/8-inch-14 thread and may be used in any single-stage reloading...

RCBS® Case Trimmer Pilots are tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer—2 and Rotary Case Trimmer...

RCBS® Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length. Note: For use with Rotary Case Trimmer and Rotary Case Trimmer—2 only.

Popular steel split ring. Fits all 7/8" x 14 dies.

  Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and...

Redding Full length die sets for bottleneck cases contain two dies (Sizer and Seater). The full length resizing die contains a decapping rod assembly with a neck expander (size button). The seating die includes bullet guide, built in crimp ring and the...

Redding Full length die sets for bottleneck cases contain two dies (Sizer and Seater). The full length resizing die contains a decapping rod assembly with a neck expander (size button). The seating die includes bullet guide, built in crimp ring and the...

69250 This decapping rod allows the Redding Small Decapping die to deprime 17 to 20 caliber cases. It even works with the small .060" flash holes found on many BR and PPC cases.

69100 This Redding Decapping Die allows you to deprime and clean your cases prior to sizing. Deprimes 22 through 50 caliber cases with lengths up to 2-1/2".   Notes: Deprimes case only This die will work for calibers listed with a case length...